Dust Extraction; Connection Of The Power Supply; Electrical Connection - Scheppach Fpts1500 Bedienungsanleitung

FPTS1500

Dust extraction

Notes on dust emission
The dust emission values measured according to the "Guidelines for the
test of dust emission (concentration parameter) for wood processing machi-
nes" by the technical wood committee are below 2 mg/m3. Thus, a consis-
tently safe compliance with the TRK threshold value for wood dust applica-
ble in the Federal Republic of Germany can be assumed when connecting
the machine to a proper extraction device with an air speed of at least 20
m/s
WARNING!
Attach a dust extraction device when using
this product in order to keep the working
area clean!
Wear a dust mask when operating this pro-
duct. Dust can be harmful to your health!

Electrical connection

1. Connect the pulg with a suitable socket.
2. Your porduct is now ready to be used.
WARNING!
Check the voltage!
The voltage must comply with the informati-
on on the rating label!
Dust extraction
GB
IE
27