Scheppach FPTS1500 Bedienungsanleitung Seite 17

FPTS1500
General Safety
Do not use the cable for purposes for which it is not intended
11
Do not use the cable to pull the plug out of the outlet. Protect the cable
–
from heat, oil and sharp edges.
Secure the workpiece
12
Use the clamping devices or a vice to hold the workpiece in place. In
–
this manner, it is held more securely than with your hand.
An additional support is necessary for long workpieces (table, trestle,
–
etc.) in order to prevent the machine from tipping over.
Always press the workpiece firmly against the working plate and stop
–
in order to prevent bouncing and twisting of the workpiece.
Avoid abnormal posture
13
Make sure that you have secure footing and always maintain your
–
balance.
Avoid awkward hand positions in which a sudden slip could cause one
–
or both hands to come into contact with the saw blade.
Take care of your tools
14
Keep cutting tools sharp and clean in order to be able to work better
–
and more safely.
Follow the instructions for lubrication and for tool replacement.
–
Check the connection cable of the electric tool regularly and have it
–
replaced by a recognised specialist when damaged.
Check extension cables regularly and replace them when damaged.
–
Keep the handle dry, clean and free of oil and grease.
–
Pull the plug out of the outlet
15
Never remove loose splinters, chips or jammed wood pieces from the
–
running saw blade.
During non-use of the electric tool or prior to maintenance and when
–
replacing tools such as saw blades, bits, milling heads.
Do not leave a tool key inserted
16
Before switching on, make sure that keys and adjusting tools are re-
–
moved.
Avoid inadvertent starting
17
Make sure that the switch is switched off when plugging the plug into
–
an outlet.
Use extension cables for outdoors
18
Only use approved and appropriately identified extension cables for
–
use outdoors.
Safety
GB-
IE
17