Maintenance - Scheppach Fpts1500 Bedienungsanleitung

FPTS1500
GB-
IE

Maintenance

WARNING!
Switch the machine off and disconnect it
from the mains voltage before carrying out
any maintenance and adjustment works.
The golden rules of care
1. Keep the instructions near the machine.
2. Keep the machine clean.
3. Wear protective goggles when cleaning the
machine.
4. Inspect the product before each use for worn
and damaged parts. Do not operate it if qou
find broken or worn parts.
• Check the saw blade regularly. Only use sharpened, crack-free and
non-deformed saw blades. Only use tools that comply with the European
standard EN847-1.
• Replace a worn bench insert immediately.
• Always keep the bench surface free of resin.
• Clean the inside of the machine such as tooth segment and bevel of the
tilting system regularly from residual wood and splints.
• Remove possible saw dust obstructions at the ejector.
CAUTION:
Do not clean plastic parts of the bench with aggressive agents. A
mild rinsing agent on a wet cloth is recommended. The machine
must not get in contact with water.
Repair:
This product does not contain any parts that can be repaired by the consu-
mer. Contact a qualified specialist to have it checked and repaired.
42
WARNING!
Only perform repairs and maintenance work according to these
instruction! All further works must be performed by a specialist.
Maintenance