Scheppach FPTS1500 Bedienungsanleitung Seite 19

FPTS1500
Additional Safety
Safety precautions
1
Warning! Do not use damaged or deformed saw blades.
–
Replace a worn table insert.
–
Only use saw blades recommended by the manufacturer which con-
–
form to EN 847-1.
Make sure that a suitable saw blade for the material to be cut is select-
–
ed.
Wear suitable personal protective equipment. This includes:
–
Hearing protection to avoid the risk of becoming hearing impaired,
–
Respiratory protection to avoid the risk of inhaling harmful dust,
–
Wear gloves when handling saw blades and rough materials. Carry
–
saw blades in a container whenever practical.
Wear goggles. Sparks generated during work or splinters, chippings
–
and dust coming from the device can lead to loss of eyesight.
Connect a dust collecting device to the electric tool when sawing
–
wood. The emission of dust is influenced, among other things, by the
type of material to be processed, the significance of local separation
(collection or source) and the correct setting of the hood/guide plates/
guides.
Do not use saw blades made of high-speed alloy steel (HSS steel).
–
In times of non-use keep the push stick or the push block with the
–
electrical power tool at all times.
Use the upper blade guard and set it to the correct position.
–
Maintenance and repair
2
Pull out the mains plug for any adjustment or repair tasks.
–
The generation of noise is influenced by various factors, including the
–
characteristics of saw blades, condition of saw blade and electric tool.
Use saw blades which were designed for reduced noise development,
insofar as possible. Maintain the electric tool and tool attachments
regularly and if necessary, initiate repairs in order to reduce noise.
Report faults on the electric tool, protective devices or the tool attach-
–
ment to the person responsible for safety as soon as they are discov-
ered.
Safe work
3
Only use saw blades for which the maximum permissible speed is not
–
lower than the maximum spindle speed of table saws and which are
suitable for the material to be cut.
Safety
GB-
IE
19