Trouble Shooting - Scheppach Fpts1500 Bedienungsanleitung

FPTS1500
Error
1.Saw blade comes
loose after switch-
ing off the motor?
2.Motor does not
start?
3.Wrong direction of
motor rotation?
4.Motor does not
perform,
does not activate?
5.Fire stains at
cutting surface?

Trouble shooting

Possible reason
Fastening nut is too
loose.
Failure of mains fuse
b) Extension cable is
defective
c) Connections at motor
or switch are not ok
d) Motor or switch are
efective
a) Condenser defective
b) Incorrect connection
a) Cross-sectional area
fuse of extension cable is
not sufficient
b) Overloading due to
blunt saw blade
a) Blunt saw blade
b) Wrong saw blade
Trouble shooting
Remedy
Tighten the fastening nut
(right-handed thread)
a) Check mains fuse
b) Replace extension cable
c) Must be checked by
electrician
d) Must be checked by
electrician
a) Must be checked by
electrician
b) Reverse of polarity of the
mains socket by electri-
cian
a) see electrical connection
b) Replace saw blade
a) Sharpen, replace saw
blade
b) Replace saw blade
GB-
IE
45