Sources Settings; Hyperdeck Settings - Blackmagic Design Atem Mini Installationsanleitung

Sources Settings

Source settings
The sources tab can be used to change labels for the switchers inputs, outputs and media
players. Each input and output will have a long name and a short name. The short name will
appear on the switcher input buttons on the software panel. The short 4 character name is used
to identify the video input on the source names display. The longer input names support up to
20 characters and are displayed in various menu selection boxes on the software control panel
and on the ATEM advanced panel displays.
To change an input name, click in the text field, enter the text and click 'save'. The input name
will be updated on the software control panel and external hardware panel if one is connected.
It's a very good idea to change both the short and long labels at the same time, so they match.
For example Camera 1 would be entered in as a long label, and CAM1 as the short label.

HyperDeck Settings

HyperDeck settings
Changing Switcher Settings 96