Panel; Picture In Picture Keyer; Setting Up Open Broadcaster - Blackmagic Design Atem Mini Installationsanleitung

Panel

Switching Mode
This setting lets you set ATEM Mini to use program preview or cut bus switching modes. Refer
to the 'Switching Modes' section for more information.

Picture in Picture Keyer

This setting lets you choose to keep the picture in picture on screen indefinitely so you can
switch content underneath it, or tie it to the next transition so when you perform the transition,
picture in picture will transition off screen with it.
Drop with Transition
Stay on with transition
TIP Drop with transition lets you smoothly turn off picture in picture by linking it
with the transition, however you can always turn picture in picture off at any time
by pressing the respective off button on the control panel.
Chroma Keyer
These settings are similar to the picture in picture keyer setting, however it applies to the
upstream keyer.
Drop with Transition
Stay on with transition

Setting up Open Broadcaster

Even though the ATEM Mini Pro and Extreme switcher models can stream directly using its
Ethernet connection, if you want to stream using an external computer then you can connect
the USB-C and it will appear as a webcam on your computer. This then lets you use streaming
software such as Open Broadcaster for streaming.
This section shows how to use Open Broadcaster to stream via the USB-C webcam output.
Open Broadcaster is an open source application that works as a streaming platform between
your ATEM Mini and your favorite streaming software like YouTube, Twitch, Facebook Live,
Vimeo Live and others. Open Broadcaster compresses your video to a bit rate that is easily
managed by your streaming app.
Below is a demonstration of how to set up Open Broadcaster to stream the webcam output
from your ATEM Mini using YouTube as the streaming application.
Ties picture in picture to the next transition and will transition off
screen when the next transition is performed.
Holds picture in picture on air so you can switch sources without
affecting picture in picture.
Ties the upstream chroma keyer to the next transition and will
transition off screen when the next transition is performed.
Holds the upstream chroma keyer on air so you can switch sources
without affecting the chroma key.
Setting up Open Broadcaster 103