Blackmagic Design ATEM Mini Installationsanleitung Seite 23

Allowing Access in DaVinci Resolve
You can upload to both new and existing Blackmagic Cloud projects from your ATEM Mini ISO
by allowing remote camera access in DaVinci Resolve's settings. Once remote access has been
enabled for a project, it will appear in the projects menu in the 'record' tab.
Allowing access to a new project:
1 Open DaVinci Resolve. In the 'project manager' window, select the 'cloud' tab and enter
your Blackmagic Cloud login details.
2 Select a Blackmagic Cloud project library from the project library list and click 'new project'.
3 With the new project window open, enter the project details. Enable 'sync proxies and originals'
along with 'allow remote camera access' in the new cloud project window and click 'create'.
If you want to upload clips to an existing DaVinci Resolve Cloud project, open the project
settings and select 'Blackmagic Cloud'. Enable the 'allow remote cameras to see this project to
load media directly into the media pool' option in the 'remote cameras' settings.
The Blackmagic Cloud project will appear in your ATEM Mini ISO switcher record tab when your
switcher is connected to the Internet and signed into your Blackmagic Cloud account.
For more information about DaVinci Resolve Cloud projects, refer to the DaVinci Resolve user
manual. You can download the manual at
www.blackmagicdesign.com/support/family/davinciresolve-and-fusion
Additional Features on ATEM Mini Pro and ATEM Mini Extreme 23