Multiview Settings - Blackmagic Design Atem Mini Installationsanleitung

Multiview Settings

If you are using ATEM Mini Pro or Extreme switchers, the multiview settings allow you to set the
multiview orientation. You can swap the position of the multiview preview and program views
by clicking on the toggle button located between them.
On each source and preview view you can turn on safe area markers to make sure your
program will look great on any monitor. Frame guides display as 16:9 for horizontal or 9:16 for
vertical workflows. Select 'all' to turn on both frame guides.
Audio meters can be turned on or off for all the switcher sources and program view by enabling
the 'all on' button in the multiview settings, or you can turn them on or off individually by clicking
the audio meter icon in each view. The opacity of the audio meters can be adjusted by
dragging the opacity slider left or right.
The multiview also includes a tally feature, so if any of the sources in the multi view are used in
a layer on the program or preview outputs, they will be highlighted red or green. A white border
means your source is not currently on the preview output, or on air on the program output.
A red border indicates the source is used on the program output and a green border indicates
a source is selected on the preview output.
Customizing the multiview
Changing Switcher Settings 95