Blackmagic Design ATEM Mini Installationsanleitung Seite 79

Channel Status
The channel status at the top of each camera controller displays the camera label, On Air
indicator and lock button. Press the lock button to lock all the controls for a specific camera.
When on air, the channel status illuminates red and displays the On Air alert.
Camera Settings
The camera settings button near the bottom left of the master wheel lets you adjust detail
settings for each camera's picture signal.
Detail
Use this setting to sharpen the image from your cameras live. Decrease or increase the level of
sharpening by selecting: Detail off, detail default for low sharpening, medium detail and
high detail.
Color Wheel
The color wheel is a powerful feature of the DaVinci Resolve color corrector and used to make
color adjustments to each YRGB channel's lift, gamma and gain settings. You can select which
setting to adjust by clicking on the three selection buttons above the color wheel.
Master Wheel
Use the master wheel below the color wheel to make contrast adjustments to all
YRGB channels at once, or luminance only for each lift, gamma or gain setting.
Reset Buttons
The reset button near the bottom right of each camera controller lets you easily choose color
correction settings to reset, copy or paste. Each color wheel also has its own reset button.
Press to restore a setting to its default state, or copy/paste a setting. Locked controllers are not
affected by the Paste feature.
The master reset button on the bottom right corner of the color corrector panel lets you reset
lift, gamma and gain color wheels plus Contrast, Hue, Saturation and Lum Mix settings. You can
paste color correction settings to camera controllers individually, or all cameras at once for a
unified look. Iris, focus, coarse and pedestal settings are not affected by the Paste feature.
When applying Paste to all, a warning message will appear asking you to confirm your action.
This is so you don't accidentally paste new settings to any unlocked cameras that are
currently on air.
Each camera controller displays the
channel status so you know which
camera is on air. Use the color
wheels to adjust each YRGB channel's
lift, gamma and gain settings.
Using Camera Control 79