Setting The Hdmi Output Using The Video Out Buttons; Direct Streaming Via Ethernet - Blackmagic Design Atem Mini Installationsanleitung

Setting the HDMI Output using the Video Out Buttons

The video out buttons on the right side of the switcher are used to switch sources to the HDMI
output on ATEM Mini Pro and HDMI out 1 on ATEM Mini Extreme. The default output source for
ATEM Mini Pro is the multiview and you can read more about this powerful feature later in this
section. ATEM Mini Extreme's default output is program for output 1 and multiview for output 2.
Press the video out buttons to switch a source to the HDMI output
To change the HDMI output source, press any of the video out buttons. For example you can
select the HDMI inputs for isolated camera recordings, or select the program output or
multiview. Compared to ATEM Mini, having the buttons built into ATEM Mini Pro and Extreme
means you can change the HDMI output directly from the unit itself! In addition to the 8 HDMI
inputs, program and multiview, ATEM Mini Extreme lets you select a clean feed or the
preview output.
NOTE If you want to switch camera 1 direct or preview to the HDMI output, these
sources are available from the 'output' menu in ATEM Software Control.

Direct Streaming via Ethernet

ATEM Mini Pro and Extreme switcher's Ethernet connector lets you stream directly while
simultaneously providing the added benefits of ATEM Software Control. You can learn more
about this powerful control software in the 'using ATEM Software Control' section.
Plug into your Internet router via Ethernet to stream directly
You can select which platform you want to use in ATEM Software Control and set all the relevant
settings for your stream. If you are setting up a broadcast on your channel that you will regularly
use, these settings will be stored in your switcher and you can then plug into any Internet
connection at any time and broadcast directly from the unit.
This section includes how to configure settings for YouTube Studio and Twitch.
TIP As you're setting up your broadcast, it's worth loading a standby graphic into
ATEM Software Control's media player and switching it to the program output so you
can perform a quick test broadcast before actually going live.
Additional Features on ATEM Mini Pro and ATEM Mini Extreme 24