Blackmagic Design ATEM Mini Installationsanleitung Seite 71

Make Up
The make up setting lets you increase the overall signal in combination with compression
settings. With loud parts of the audio reduced using compression, you can now use the make
up control to boost the overall sound without clipping.
Limiter
The limiter prevents peaks of the signal from exceeding a set maximum level. A limiter is helpful
to prevent hard clipping. For example, if you set the limiter to -8 dB, the input signal will never
exceed that level. Adjusting the attack, hold and release settings will set how gentle the limiter
affects the signal.
Dynamics Controls Characteristics
Control
Expander/Gate
Expander Controls*
Threshold
Range
Ratio
Attack
Hold
Release
Expander/Gate
Gate Controls*
Threshold
Range
Attack
Hold
Release
Compressor
Compressor Controls
Threshold
Ratio
Attack
Hold
Release
Limiter
Limiter Controls
Threshold
Attack
Hold
Release
* Master Dynamics expander/gate controls are unused in Master Dynamics.
** Master Dynamics expander/gate threshold default is -35dB. Mic Dynamics expander/gate
threshold default is -45dB.
Minimum Default
-50dB -45dB**
0dB 18dB
1.0:1 1.1:1
0.5ms 1.4ms
0.0ms 0.0ms
50ms 93ms
-50dB -45dB**
0dB 18dB
0.5ms 1.4ms
0.0ms 0.0ms
50ms 93ms
-50dB -35dB
1.0:1 2.0:1
0.7ms 1.4ms
0.0ms 0.0ms
50ms 93ms
-50dB -12dB
0.7ms 0.7ms
0.0ms 0.0ms
50ms 93ms
Maximum
0dB
60dB
10:1
30ms
4s
4s
0dB
60dB
30ms
4s
4s
0dB
10:1
30ms
4s
4s
0dB
30ms
4s
4s
ATEM Software Control 71