Assembling The Grass Catcher Box - Stihl Rm 655.1 Vs Gebrauchsanleitung

English
► Press the control bar for mowing (9) toward
the handlebar (2) and hold it there.
► Pull the starter grip (10) slowly in the direction
of the cable guide (11).
► Attach the starter grip (10) to the cable
guide (11).
► Release the control bar for mowing (9).
► Attach the spark plug boot.
The handlebar does not need to be removed
again.
6.2 Removing and Inserting the
Mulch Insert
6.2.1 Removing the mulching insert
► Shut off the engine.
► Place the lawn mower on a level surface.
► Open the discharge flap (1) and hold it open.
► Lift the detent catch (2).
► Pull the mulch insert (3) diagonally upward out
of the discharge chute.
► Close the discharge flap (1).
6.2.2 Inserting the mulching insert
► Shut off the engine.
► Place the lawn mower on a level surface.
32
6 Assembling the Lawn Mower
► Open the discharge flap (1) and hold it open.
► Insert the mulch insert (2) into the discharge
chute diagonally from above.
► Turn the mulch insert (2) to horizontal, press it
down until it audibly engages with both retain‐
ing lugs (3) in the housing.
► Close the discharge flap (1).
6.3 Assembling, Attaching and
Detaching the Grass Catcher
Box
6.3.1

Assembling the grass catcher box

► Place the top part (1) of the grass catcher box
on the bottom part (2) of the grass catcher
box.
► Press the pins (4) through the openings (3)
from the inside.
► Press the upper part of the grass catcher
box (1) downward.
The upper part (1) of the grass catcher box
audibly engages.
6.3.2 Attaching the grass catcher box
► Disengage the blade clutch.
► Place the lawn mower on a level surface.
0478-111-9963-A