Assembling The Grass Catcher Box - Stihl Rma 235.1 Gebrauchsanleitung

English
► Hold upper handlebar (5) against lower han‐
dlebars (1) so the bores align.
► Place cable (10) into cable clip (8).
► On the side with the cable, push screw (6)
through bores (11) in cable clip (8), upper han‐
dlebar (5) and lower handlebar (1) from the
outside inwards.
► On the other side, push screw (6) through
bores (11) in upper handlebar (5) and lower
handlebar (1) from the outside inwards.
► Fit rotary knob (9) onto screws (6) on both
sides and screw in.
Upper handlebar (5) is firmly attached to lower
handlebars (1).
► Place cable (10) into cable clip (7).
► Press cable clip (7) onto upper handlebar (5)
and allow to engage.
► Place cable (10) into cable clip (12).
► Press cable clip (12) onto lower handlebar (1)
and allow to engage.
The handlebar must not be dismantled again.
7.2 Folding Up and Folding the
Handlebar
7.2.1 Folding Up the Handlebar
► Switch the lawn mower off and remove the
battery.
► Place the lawn mower on a level surface.
► Fold up upper handlebar (2) and hold with one
hand. Make sure that cable (4) is not dam‐
aged.
► Tighten rotary handles (1).
Handlebar (2) is firmly attached to the lawn
mower.
40
7 Assembling the Lawn Mower
Upper handlebar (2) is firmly attached to lower
handlebar (3).
7.2.2 Folding the Handlebar
The handlebar can be folded for space-saving
transport or storage.
► Switch the lawn mower off and remove the
battery.
► Place the lawn mower on a level surface.
► Unscrew rotary handles (1) until they turn
freely.
► Fold down upper handlebar (2) forwards,
ensuring that cable (3) is not damaged.
7.3 Assembling, Attaching and
Detaching the Grass Catcher
Box
7.3.1

Assembling the Grass Catcher Box

► Fit upper part of grass catcher box (1) onto
lower part of grass catcher box (2).
► Press pins (3) through openings (4) from the
inside.
► Press upper part of grass catcher box (1)
downwards.
The upper part of the grass catcher box
engages with a click.
0478-131-9981-A