7 Refuelling the Lawn Mower
► If the mulching insert is inserted: Remove the
mulching insert.
► Open the discharge flap (1) and hold it open.
► Take hold of the grass catcher box (2) by its
handle (3) and attach it to the notches (4).
► Place the discharge flap (1) on the grass
catcher box (2).
6.3.3
Detaching the Grass Catcher Box
► Stop the engine.
► Place the lawn mower on a level surface.
► Open the discharge flap and hold it open.
► Remove the grass catcher box upwards by the
handle.
► Close the discharge flap.
6.4
Adding Engine Oil
The engine oil lubricates and cools the engine.
The engine oil specification and capacity can be
found in the engine instruction manual.
NOTICE
■ The lawn mower does not contain any engine
oil on delivery. Starting the engine with no or
too little engine oil may damage the lawn
mower.
► Always check the engine oil level before
starting and if necessary top up.
► Add the engine oil as described in the engine
instruction manual.
7
Refuelling the Lawn Mower
7.1
Refueling the lawn mower
NOTICE
■ The lawn mower can be damaged if fueled
with an incorrect fuel.
► Pay attention to the User Manual for the
motor.
► Shut off the engine.
► Place the lawn mower on a level surface.
► Use a damp cloth to clean the area around the
fuel tank cap.
0478-111-9963-A
► Turn the fuel tank cap (1) counterclockwise
until it can be removed.
► Remove the fuel tank cap.
► Use a suitable filling aid to add fuel so that the
fuel level stops at least 15 mm below the fuel
tank brim.
► Install the fuel tank cap on the tank.
► Turn the tank cap clockwise and tighten it
down firmly by hand.
The fuel tank is closed.
8
Adjusting the Lawn Mower
for the User
8.1
Folding open the handlebar
► Shut off the engine.
► Pull off the spark plug boot.
► Place the lawn mower on a level surface.
► Raise the handlebar (1).
► Fold open the handlebar (1) and ensure that
the cables are not pinched.
► Allow the handlebar (1) to snap completely
into position.
The handlebar is firmly attached to the lawn
mower.
English
33