SICK PowerProx WTT190LC-B2233A00 Betriebsanleitung Seite 22

OPERATING INSTRUCTIONS
2 Safety information
en
2.1 Intended use
22 O P E R A T I N G I N S T R U C T I O N S | PowerProx Small Teach-in - WTT190LC-B2233A00
The following information is available depending on the product:
• This document in all available language versions
• Data sheets
• Other publications
•
CAD files and dimensional drawings
• Certificates (e.g., declaration of conformity)
• Software
• Accessories
Connection, mounting and configuration of the product must only be car‐
ried out by qualified personnel.
This product does not constitute a safety component as defined in the
NO
Machinery Directive.
2006/42/EC
SAFETY
Do not install the product in places exposed to direct UV radiation (sun‐
light) or other weather conditions.
The product must be adequately protected against moisture and contami‐
nation.
Laser notes
CAUTION
Interference, manipulation or incorrect use can lead to hazardous exposure due to laser
radiation.
The emitted light beam must not be focused by means of additional optical devices.
LASER
1
Figure 1: Laser class 1
This device complies with the following standards:
•
EN 60825-1:2014+A11:2021, IEC 60825-1:2014
• Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC
60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019.
The laser is eye-safe.
The laser marking is located on the housing imprint on the sensor.
The WTT190LC-B2233A00 is an opto-electronic photoelectric proximity sensor (referred
to as "sensor" in the following) for the optical, non-contact detection of objects. If
the product is used for any other purpose or modified in any way, any warranty claim
against SICK AG shall become void.
Photoelectric proximity sensor with background suppression and analog distance value
output.
8024108.1GKT/2024-12-03 | SICK
Subject to change without notice