pyrexx XSD200 Gebrauchsanleitung Seite 59

5 Installation
The device is held by a magnet carrier at
the installation location. The magnet car-
rier can be mounted by gluing or drilling.
To avoid injuries from improper
installation, the instructions in this man-
ual must be followed. The general safe-
ty regulations should also be observed.
EN
EN
User Manual: XSD200 - Smoke Alarm Device with Radio Link
CAUTION
Possible property damage!
Using other fastening material (not
enclosed) or wrong conditions at the
installation location can cause the
device to fall down.
f For adhesive mounting, use only
the supplied mounting material
(adhesive pad).
f For drill mounting, use screws
and dowels that are suitable for
the respective surface.
f Ensure that the installation
location is strong enough, solid,
dry, free from grease, dust and
loose paint etc.
f Note that the magnet carrier
magnetically attracts only from
one side.
59