Herunterladen Diese Seite drucken

pyrexx XSD200 Gebrauchsanleitung Seite 57

Vorschau ausblenden Andere Handbücher für XSD200:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

In this installation scenario, you can mount the
In this installation scenario, you can mount the
devices on the wall.
devices on the wall.
f Position the device centrally on the
f Position the device centrally on the
longer wall.
longer wall.
f Mount the device 0.5 m below the ceiling.
f Mount the device 0.5 m below the ceiling.
Rooms with slanted ceilings
Rooms with slanted ceilings
Rooms with slanted ceilings
Rooms with slanted ceilings
Rooms with slanted ceilings
(slope angle > 20°)
(slope angle > 20°)
(slope angle > 20°)
(slope angle > 20°)
(slope angle > 20°)
In rooms with ceiling slope angles of more than
In rooms with ceiling slope angles of
In rooms with ceiling slope angles of more than
more than 20° to the horizontal, heat
20° to the horizontal position, heat pads can
20° to the horizontal position, heat pads can
build-ups can occur in the ceiling peak
form in the ceiling peak that impede the smoke
form in the ceiling peak that impede the smoke
which stop smoke entering the smoke
Räume mit geraden Raumdecken
Räume mit geraden Raumdecken
entering the smoke alarm device.
entering the smoke alarm device.
alarm device.
(Neigungswinkel < 20°)
(Neigungswinkel < 20°)
1/2
0,5
> 20°
> 20°
Fig. 4
Rooms with slanted ceilings
Fig. 4
Rooms with slanted ceilings
Fig. 13
Rooms with slanted ceilings
Abb. 3
Räume mit geraden Raumdecken
Allowed
Allowed
erlaubt
Allowed
Not allowed
Not allowed
nicht erlaubt
Not allowed
Note the following for location selection
B e a c h t e n S i e F o l g e n d e s b e i d e r
in rooms with slanted ceilings:
Standor tauswahl in Räumen mit geraden
f Mount devices at least 0.5 m and at
Raumdecken:
most 1 m from the ceiling peak.
54
f bei Deckenabsätzen den höchst gelege-
54
nen Montagepunkt auswählen
EN
f Geräte waagerecht zum Montageunter-
EN
grund montieren
1/2
0,5
Operating Manual: FRWM200 – Smoke Alarm Device with Radio Link
Operating Manual: FRWM200 – Smoke Alarm Device with Radio Link
User Manual: XSD200 - Smoke Alarm Device with Radio Link
Note the following for locations in rooms with
Note the following for locations in rooms with
slanted ceilings:
slanted ceilings:
f Mount devices at least 0.5 m and at a
f Mount devices at least 0.5 m and at a
maximum of 1 m away from the ceiling
maximum of 1 m away from the ceiling
peak.
peak.
4.3 Rooms with slanted and
4.3 Rooms with slanted and
4.3 Rooms with slanted and
horizontal ceilings
horizontal ceilings
horizontal ceilings
Räume mit geraden Raumdecken
Räume mit geraden Raumdecken
(Neigungswinkel < 20°)
(Neigungswinkel < 20°)
1/2
Fluren, die zwischen 1 und 3 m breit sind:
0,5
f weniger als 7,5 m Abstand zwischen
Stirnfläche (Ende des Flures) und dem
ersten Gerät einhalten
0,5
f weniger als 15 m Abstand zwischen zwei
Geräten einhalten
> 20°
> 20°
Schmale Räume oder Flure
Schmale Räume oder Flure
Fig. 5
Straight mounting surface at least
Fig. 14
Straight mounting surface at
Fig. 5
(< 1 m breit)
(< 1 m breit)
1 m long and 1 m wide
Abb. 3
Räume mit geraden Raumdecken
least 1 m long and 1 m wide
Beachten Sie zusätzlich Folgendes bei der
Standortauswahl in schmalen Räumen oder
erlaubt
Allowed
Allowed
Fluren, die weniger als 1 m breit sind:
nicht erlaubt
Not allowed
Not allowed
f Abstand zu umliegenden Wänden
B e a c h t e n S i e F o l g e n d e s b e i d e r
einhalten (Ausnahme: Abstand weniger
Standor tauswahl in Räumen mit geraden
als 0,5 m)
Raumdecken:
Schmale Räume oder Flure
Schmale Räume oder Flure
f bei Deckenabsätzen den höchst gelege-
(Grundfläche < 6 m²)
(Grundfläche < 6 m²)
nen Montagepunkt auswählen
Eine Ausnahme bilden schmale Räume und
f Geräte waagerecht zum Montageunter-
Flure, die eine Grundfläche von weniger als
grund montieren
6 m
haben.
2
Schmale Räume oder Flure
Schmale Räume oder Flure
Bei dieser Montagesituation können Sie die
Geräte auch an der Wand montieren.
(zwischen 1 und 3 m breit)
(zwischen 1 und 3 m breit)
Beachten Sie zusätzlich Folgendes bei der
f Gerät mittig an der längeren Wand
1/2
Straight mounting surface at least
1 m long and 1 m wide
Allowed
Not allowed
Flu
> 1,00
> 1,00
f
1/2
1/2
1/2
1/2
0,5
0,5
f
Sc Sc
(< (<
Be
Sta
Flu
f
Sc Sc
(G (G
Ein
Flu
6 m
Be
Ge
EN
EN
f
57
f

Werbung

loading

Verwandte Produkte für pyrexx XSD200