Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Manual Operation(without remote)
CAUTION :
The manual button is intended for testing purposes and emergency operation
only. Please do not use this function unless the remote control is lost and it is
absolutely necessary. To restore regular operation, use the remote control to
activate the unit. Unit must be turned o before manual operation.
To operate your unit manually:
Open the front panel of the indoor unit.
●
Note: For some units, there is a supporting
rod located on the left or right side. Please
use it to prop up the panel.
Locate the MANUAL CONTROL button on the
●
right-hand side of the unit.
Press the MANUAL CONTROL button one time to
●
activate FORCED AUTO mode.
Press the MANUAL CONTROL button again to
●
activate FORCED COOLING mode.
Press the MANUAL CONTROL button a third time
●
to turn the unit o .
Release the supporting rod(if any), then close the
●
front panel.
FOR PRODUCT USE
Supporting rod
(located on the
left or right,
model dependent )
38
Manual
control
button
Werbung
