Scheppach MS225-56 Originalbetriebsanleitung Seite 24

Table of contents
1 Introduction ........................................................
2 Product description (Fig. 1-22)...........................
3 Scope of delivery (Fig. 1-2) ................................
4 Proper use..........................................................
5 Safety instructions..............................................
6 Technical data....................................................
7 Unpacking ..........................................................
8 Assembly............................................................
9 Before commissioning........................................
10 Start-up ..............................................................
11 Operation ...........................................................
12 Working instructions...........................................
13 Cleaning .............................................................
14 Maintenance.......................................................
15 Transport............................................................
16 Storage...............................................................
17 Repair & ordering spare parts ............................
18 Troubleshooting .................................................
19 Disposal and recycling .......................................
20 EU Declaration of Conformity.............................
21 Exploded view .................................................... 119
Explanation of the symbols on the
product
Symbols are used in this manual to draw your attention to
potential hazards. The safety symbols and the accompa-
nying explanations must be fully understood. The warn-
ings themselves will not rectify a hazard and cannot re-
place proper accident prevention measures.
Attention! Failure to observe the safety signs
and warning information affixed to the prod-
uct and failure to observe the safety and op-
erating manual can result in serious injury or
even death.
Before commissioning, read and observe
the operating manual and safety instruc-
tions!
Do not mow uphill or downhill.
Before operating the lawnmower, remove
any small parts lying around that could be
thrown about.
Danger due to parts flying off while the en-
gine is running.
Make sure that other persons maintain a
sufficient safety distance.
24 | GB
24
25
25
25
26
28
28
28
29
30
30
32
32
33
35
35
36
37
37
38
1 Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new product brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability for
damage to the product or caused by the product arising
from:
• Improper handling
• Non-compliance with the operating manual
www.scheppach.com
Remove the spark plug connector prior to all
maintenance work.
Keep your hands and feet away from the ro-
tating blades.
The motor becomes very hot during opera-
tion, do not touch!
Wear hearing protection. Wear safety gog-
gles.
ATTENTION! Operating materials are flam-
mable and explosive - danger of burning. Do
not refuel while the engine is hot or running.
Tank contents
Engine oil
Blade length. Max. cutting width.
Guaranteed sound power level of the prod-
uct.
Check the oil level.
DRIVE - Drive bow
STOP - Engine brake lever
Danger of poisoning! Only use the product
outdoors and never in closed or poorly venti-
lated rooms.
The product complies with the applicable
European directives.
The product complies with the applicable
Serbian directives.