Danfoss VLT FC 102 Installationshandbuch Seite 3

VLT® Frequency Converters, 90–400 kW
Installation Guide
Installation
1
Qualified Personnel
1.1
Only qualified personnel are allowed to install, commission, and maintain Danfoss drives. Qualified personnel are trained individuals who
are familiar with and authorized to mount and wire the drive in accordance with pertinent laws and regulations. Also, qualified personnel
must be familiar with the instructions and safety measures described in this installation guide.
Safety Symbols
1.2
The following symbols are used in this guide:
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Indicates information considered important, but not hazard-related (for example, messages relating to property damage).
Safety Precautions
1.3
LACK OF SAFETY AWARENESS
Before starting installation, read all safety guidelines and precautions in this installation guide. Additional
documentation such as the product-specific operating guide, design guide, and programming guide, as well
as the functional safety guides can be accessed by scanning the QR code on the front cover. PC tools and
MyDrive® ecoSmart™ can be downloaded at www.danfoss.com.
This guide gives important information on preventing injury and damage to the equipment or the system.
Ignoring this information can lead to death, serious injury, or severe damage to the equipment.
Make sure to fully understand the dangers and safety measures present in the application.

Before performing any electrical work on the drive, lock out and tag out all power sources to the drive.

Danfoss A/S © 2024.06
DANGER
WARNING
CAUTION
NOTICE
WARNING
Installation
AN41701949085201-000201 / 130R1260 |
3