Herunterladen Diese Seite drucken

HYVA HC801 Bedienungs- Und Wartungshandbuch Seite 101

Werbung

B.9.2 PROCEDURA DI
STABILIZZAZIONE GRU
Si ricorda che è obbligatorio
agire sempre sui comandi che si
trovano sul lato ove si opera.
L'operatore deve assicurarsi
che vi sia lo spazio necessario per la
rotazione
automatica
stabilizzatori (vedi §A.1.5).
Eseguire le seguenti operazioni:
1) Bloccare le ruote con apposite
zeppe.
2)
Per
attivare
i
comandi
stabilizzatori tirare la leva DEV (A).
In caso di trasmittente con display
premere
anche
il
tasto
FUNCTIONS" (B) sulla trasmittente.
In caso di stabilizzatori comandati via
radio premere anche il tasto verde sul
lato dove si sta operando (C).
OUT
3) Disattivare il dispositivo di blocco
delle aste stabilizzatrici.
B.9.2 STABILIZATION
PROCEDURE OF THE CRANE
always use the controls on the side
on which the you are operating the
crane.
The operator must make sure
there is the necessary space for the
dei
cilindri
automatic rotation of the stabilizer
legs (see §A.1.5).
Execute the following procedure:
1) Block the wheels with suitable
wedges.
degli
2) In order to enable the stabilizers
controls pull the lever DEV (A).
In case of transmitter with display push
"STAB
also the "STAB FUNCTIONS" (B)
button on the transmitter.
In case of stabilizers radio controlled,
push also the green button (C) on the
side where the stabilizers are operated.
A
3) Disable the stabilizer extension lock
devices.
Remember that you must
B
B-40
B.9.2 ABSTÜTZVERFAHREN
DES KRANS
Wir weisen ausdrücklich hin,
dass die Steuerhebel immer auf der
Seite zu benutzen sind, wo die
Kranbewegung erfolgt.
Der Kranführer muss sich
versichern, dass es den nötigen
Raum für die automatische Drehung
der Abstützbeine gibt (siehe §A.1.5).
Das folgende Verfahren ausführen:
1) Die Räder mit den entsprechenden
Keilen blockieren.
2) Den Hebel DEV (A) ziehen um die
Abstützungen zu aktivieren.
Im Fall von Funksender mit Display,
auch die Taste "STAB FUNCTIONS"
(B) auf dem Sender drücken.
Im
Fall
von
funkferngesteuerten
Abstützungen, auch die grüne Taste (C)
auf
der
Seite
drücken,
Abstützungen bedient werden.
C
3) Die Sperrvorrichtung der Abstütz-
stangen lösen.
wo
die

Werbung

loading