INVENTOR LV6CI-12WiFiR Installationshandbuch Seite 16

Step 2: Hang indoor unit.
1. Use the included paper template to cut a rectangular hole in the ceiling, leaving at least 1m (39")
on all sides. The hole will be 60x60cm (23.6x23.6") or 90x90cm (35.4x35.4") big. Be sure to
mark the areas where ceiling hook holes will be drilled.
Drain hose side
Refrigerant piping side
545mm / 21.5" (Suspension bolt)
570mm / 22.4"(Body)
647mm / 25.5"(Ceiling opening)
CAUTION
The unit body should align per-
fectly with the hole. Ensure that
the unit and the hole are the
same size before moving on.
 Page 12 
ƒPage 16
„
>1m / 39"
>1m / 39"
>1m / 39"
>1m / 39"
Fig. 3.3