Page For Programming The Time Period Of The Heat Recovery Units; Page Of Number Of Pumps Present In The System - Aermec Vmf-Rcc Zubehörhandbuch

PAGE FOR PROGRAMMING THE TIME PERIOD OF THE HEAT RECOVERY UNITS

The scenario that can be associated to the fan coils system can be read and/or modified in this page. In this case, from the associated time program, only time periods for
controlling heat recovery units are considered. Instead, temperature sets do not have any function. The acceptable values range from 0 to 5 min.
1. VOC Sen.: this icon indicates the connection of the V.O.C. probe associated to the recovery unit (
2. URC: index of the recovery unit (1 to 3)
3. Time schedule of the recovery unit
4. Threshold of the recovery unit activation with the presence of the VOC probe
5. Key for displaying the instantaneous value of the VOC probe
6. Keys for changing the index of the recovery unit
7. With the denied display of the icon, indicate the reading of the instantaneous datum given by the VOC probe
8. Value of the air instantaneous quality read by the VOC sensor
To enter the data editing mode, press the
The data is confirmed by pressing the enter (
Use keys and to scroll all heat recovery units of the system.
Press the key for the system to display the menu page.
Using the Page Up and Page Down
The management of the recovery unit enablement is described in the following table:
Hourly programming
-
-
x
x

PAGE OF NUMBER OF PUMPS PRESENT IN THE SYSTEM

This page is used to enter the number of circulator pumps available in the system. The acceptable values range from 0 to 12.
64
1
3
5
7
key. This status is highlighted if no string is displayed. To change the value, act on the increase (
) key, while the effective memorisation in EEPROM is highlighted by the disappearance of the denied display.
keys, scroll the pages contained in the sub-menu.
V.O.C. probe
- Recovery unit always enabled
Recovery unit is enabled if the concentration of the gases detected by the probe exceeds the activation
x
threshold
- Recovery unit enabled within the time period described in the associated program
The recovery unit is enabled if the concentration of gases detected by the probe exceeds the activation
x
threshold, within the time period
2
4
6
8
present, not present).
Operation
) and decrease ( ) keys.
23/03 – VMF-RCC_UN50_01