Fan Coils Program Page - Aermec Vmf-Rcc Zubehörhandbuch

1 Key to enable/disable the set point forcing by the supervisor
2 Keys to select the forced functioning mode of the zone
If the "SetPoint" is:
— LOCKED = the setpoint cannot be edited from the terminal on the machine (VMF-E2 or E4);
— UNLOCKED = the setpoint can be edited from the terminal on the machine (VMF-E2 or E4);
If the "Mode" is:
— LOCAL = the functioning mode (AUTO, V1, V2, V3, AUX)can be edited from the terminal on the machine (VMF-E2 or E4);
— AUTO = AUTO functioning mode will be set. This mode cannot be edited from the terminal on the machine (VMF-E2 or E4);
— V1 = V1 functioning mode will be set. This mode cannot be edited from the terminal on the machine (VMF-E2 or E4);
— V2 = V2 functioning mode will be set. This mode cannot be edited from the terminal on the machine (VMF-E2 or E4);
— V3 = V3 functioning mode will be set. This mode cannot be edited from the terminal on the machine (VMF-E2 or E4);
— AUX = AUX functioning mode will be set. This mode cannot be edited from the terminal on the machine (VMF-E2 or E4);
ATTENTION: if the setpoint lock is selected and/or a functioning mode is forced, the lock status will be notified on the terminal on the machine:
VMF-E2 = white led flashing;
VMF-E4 = the padlock icon will be displayed.
For the zones served by MZC plenums, the AUTO/V1/V2/V3/AUX modes involve forcing them to be enabled to function.
To enter the temperature set editing mode, press the
decrease ( ) keys. The data is confirmed by pressing the enter (
display.
Press the key for the system to display the menu page.
Using the Page Up and Page Down

FAN COILS PROGRAM PAGE

In this page it is possible to read and/or modify the scenario that can be associated to the fan coils system. The fan coil programs that are managed within the TIME PERIODS
menu.
To enter the program editing mode, press the
( ) keys. The data is confirmed by pressing the enter (
Press the key for the system to display the menu page.
Using the Page Up and Page Down
54
1
key. This status is highlighted when no parameter is displayed. To change the value, act on the increase (
) key, while the effective memorisation in EEPROM is highlighted by the disappearance of the denied
keys, scroll the pages contained in the sub-menu.
key. This status is highlighted when no parameter is displayed. To change the value, act on the increase (
) key, while the effective memorisation in EEPROM is highlighted by the disappearance of the denied display.
keys, scroll the pages contained in the sub-menu.
2
23/03 – VMF-RCC_UN50_01
) and
) and decrease