Program Page - Aermec Vmf-Rcc Zubehörhandbuch

1 Program selected
To select the program time, scroll the list of icons using the keys identified by the
Press the key for the system to display the menu page.

PROGRAM PAGE

In this page it is possible to display and/or set the time periods of all days of the week.
1. PRG: program index under examination
2. DAY: day of the week being displayed
3. ON 1: switch-on time of the first time period
4. ON 2: switch-on time of the second time period
5. OFF 1: switch-off time of the first time period
6. OFF 2: switch-off time of the second time period
7. T SET 1: room temperature set of the first time period
8. T SET 2: room temperature set of the second time period
To enter the "program" modification mode, press the
increase ( ) and decrease ( ) keys and to confirm simply press the enter key (
The date change procedure takes place on confirmation of all data present on the page and the disappearance of the cursor.
If just one time period is to be set during the day, just set ON 2 and OFF 2 equal to 00:00.
During programming of the time periods, pay attention to the introduction of data. In fact, it is implied that OFF 1 > ON 1, ON 2 > OFF 1 and OFF 2 > OFF 1.
If this condition is not respected after the last time the
Use the Page Up and Page Down
Press the key for the system to display the menu page.
52
1
3
5
7
key. This state is highlighted by the denied display of the ON 1 time data. To change the value, simply act with the
key is pressed, the
keys to scroll the time periods set on the different days of the week.
1
, keys. After it has been identified, is confirmed by pressing the enter
). In this way the cursor passes to the minutes of the ON 1 data.
string is displayed.
2
4
6
8
23/03 – VMF-RCC_UN50_01
key.