From this page it is possible to read and/or modify the regulation set at which the fan coil thermostat is forced to work. The range of acceptable values is 0 ÷ 33.0 [°C].

Key to enable/disable the set point forcing by the supervisor

Keys to select the forced functioning mode of the zone

If the "SetPoint" is:

— LOCKED = the setpoint cannot be edited from the terminal on the machine (VMF-E2 or E4);

— UNLOCKED = the setpoint can be edited from the terminal on the machine (VMF-E2 or E4);

If the "Mode" is:

— LOCAL = the functioning mode (AUTO, V1, V2, V3, AUX)can be edited from the terminal on the machine (VMF-E2 or E4);

— AUTO = AUTO functioning mode will be set. This mode cannot be edited from the terminal on the machine (VMF-E2 or E4);

— V1 = V1 functioning mode will be set. This mode cannot be edited from the terminal on the machine (VMF-E2 or E4);

— V2 = V2 functioning mode will be set. This mode cannot be edited from the terminal on the machine (VMF-E2 or E4);

— V3 = V3 functioning mode will be set. This mode cannot be edited from the terminal on the machine (VMF-E2 or E4);

— AUX = AUX functioning mode will be set. This mode cannot be edited from the terminal on the machine (VMF-E2 or E4);

ATTENTION: if the setpoint lock is selected and/or a functioning mode is forced, the lock status will be notified on the terminal on the machine:

VMF-E2 = white led flashing;

VMF-E4 = the padlock icon will be displayed.

The winter and summer ambient sets can be edited and stored in the EEPROM module for every fan coil. If the "functioning mode" parameter is set in WINTER, the system

envisions the use of the data inherent the winter season, vice versa in the summer. This way of operating makes it easier for the user, who does not have to worry about re-pro-

gramming all of the areas on season change-over

To enter the temperature set editing mode, press the

decrease (

) keys. The data is confirmed by pressing the enter (

display.

Press the

key for the system to display the menu page.

Using the Page Up

and Page Down

FAN COIL PROGRAM PAGE

In this page it is possible to read and/or modify the scenario that is associated to the fan coil in order to enable its functioning in determined time periods of the day. The

programs that can be associated to the fan coils are managed within the time PERIODS MENU.

To enter the program editing mode, press the

(

) keys. The data is confirmed by pressing the enter (

Press the

key for the system to display the menu page.

Using the Page Up

and Page Down

FAN COIL NAME PAGE

In this page a string of 8 characters can be associated to every fan coil or area in order to make acknowledgement easier during the display via the FAN COIL MONITOR page.

23/03 – VMF-RCC_UN50_01

key. This status is highlighted when no parameter is displayed. To change the value, act on the increase (

) key, while the effective memorisation in EEPROM is highlighted by the disappearance of the denied

keys, scroll the pages contained in the sub-menu.

key. This status is highlighted when no parameter is displayed. To change the value, act on the increase (

) key, while the effective memorisation in EEPROM is highlighted by the disappearance of the denied display.

keys, scroll the pages contained in the sub-menu.

) and decrease

) and

Inhaltsverzeichnis

Set Temperature Page; Fan Coil Program Page; Fan Coil Name Page - Aermec Vmf-Rcc Zubehörhandbuch

Verfügbare Sprachen