Comfort Mode; Fan Coil Global Set; Fan Coils Set Page; Set Temperature Page - Aermec Vmf-Rcc Zubehörhandbuch

Economy mode
Using the key it is possible to start the time period overwriting procedure of the day that is being displayed onto all of the remaining days of the week. This function is
very useful for speeding up programming of time periods in all of those cases where a daily particularisation is required. Therefore, by pressing the key, the
in the display throughout the running time of the copy procedure.

12 FAN COIL GLOBAL SET

FAN COILS SET PAGE

This page concerns the fan coils network and allows to characterise all fan coils in the same way in order to simplify the use of the system by the operator if he is with particular
systems, situations and/or needs.
1. T SET: room set temperature can be set on all fan coils.
2. SET BLOCK: the open padlock
and every fan coil has the characterisation that is displayed in the page.
3. PRG: hourly program that can be set on all fan coils
Using the key, enable and/or disable the SET BLOCK at all fan coils.

Note: The / key is active if the fan coils work with the set block.
The icon indicates that the fan coil system (not the individual) is momentarily enabled. Pressing the button disables the functioning of the same and the changing of
the image into .
The icon indicates that the fan coil system is momentarily disabled. Pressing the button enables the functioning of the same and the changing of the image into
By pressing the key, access the pages regarding the "set fan coils" parameters.

SET TEMPERATURE PAGE

From this page it is possible to read and/or modify the regulation set at which the fan coil thermostats are forced to work. The range of acceptable values is 0 ÷ 33.0 [°C].
23/03 – VMF-RCC_UN50_01
Press key ECO/COM
1
indicates that all fan coils are restricted by parameters set in the "Global fan coil set". If this is not the case, the padlock appears closed

Comfort mode

Press key ECO/COM
2
3
icon appears
.
53