Generator Stand-By Delay From Fan Coil Thermostat Page - Aermec Vmf-Rcc Zubehörhandbuch

To enter the control type modification mode, press the
) and decrease ( ) keys. The data is confirmed by pressing the enter (
denied display.
Press the key for the system to display the menu page.
Using the Page Up and Page Down

GENERATOR STAND-BY DELAY FROM FAN COIL THERMOSTAT PAGE

Use this page to enable and/or disable the possibility of switching off the chiller after a pre-fixed time if all fan coils have been switched off from the thermostat to reach the
values set for the single rooms. The acceptable values range from 0 to 120 min.
Level: user.
1. HYSTERESIS:
(delay = 0) indicates that the chiller block cannot be enabled
(delay > 0) indicates that the chiller block function is enabled
2. DELAY

Note: The generator is forced into stand-by also if all fan coils have been switched off by the user (selector switch set to OFF). The machine status changes automatically with at
least one fan coil enabled to function. This feature is not linked to any system parameter!
ON
OFF
To enter the generator stand-by delay editing mode, press the
decrease ( ) keys. The data is confirmed by pressing the enter (
display.
Press the key for the system to display the menu page.
Using the Page Up and Page Down
The VMF-RCC panel will not manage the heat pumps/chiller being enabled in relation to fan coil time periods, or to room thermostats demand in DHW
production systems equipped with MultiControl devices. This logic underlies the need to keep the external units ready for any requests from the DHW
system, which is managed autonomously by the MultiControl controller.
62
key. This state is highlighted by the denied display of the string. To change the value, act on the increase (
keys, scroll the pages contained in the sub-menu.
1
N° FAN COILS WITH REQUEST FROM THERMOSTAT
CHILLER STATE
key. This state is highlighted if no data is displayed. To change the value, act on the increase (
) key, while the effective memorisation in eeprom is highlighted by the disappearance of the denied
keys, scroll the pages contained in the sub-menu.
) key, while the effective memorisation in EEPROM is highlighted by the disappearance of the
2
Time
CHILLER SWITCH-OFF
DELAY
Time
23/03 – VMF-RCC_UN50_01
) and