Room Temperature Page; User Menu; Season Page; Lcd Setting Page - Aermec Vmf-Rcc Zubehörhandbuch

ROOM TEMPERATURE PAGE

This page is used to set the room thermostat's set temperature and the functioning band implemented by the E5 panel. The admissible values for these parameters are:
— 12.5 ÷ 35.0 °C = Machine setpoint
— 0 ÷ 2.0 °C = On-Off band
To enter the "Room temperature"/"On-Off Band" editing mode, press the
the increase ( ) and decrease (
disappearance of the denied display.
Pressing the key leads the system to display the "Chiller" page.
Using the Page Up and Page Down

10 USER MENU

SEASON PAGE

On this page it is possible to select the system functioning mode, i.e.the winter or summer mode can be enabled.
To enter the "functioning mode" modification mode, press the
increase ( ) and decrease ( ) keys. The selection is confirmed by pressing the enter (
disappearance of the denied display.
Press the key for the system to display the menu page.
Using the Page Up and Page Down

LCD SETTING PAGE

Use this page to select:
— the type of language you want to work with (only Italian is available in this version).
— the LCD contrast to improve the display. The values acceptable for this parameter can range from 0 to 100 %.
50
) keys. The data is confirmed by pressing the enter (
keys, scroll the pages contained in the sub-menu.
key. This state is highlighted by the denied display of the string. To change the season, just act on the
keys, scroll the pages contained in the sub-menu.
key. This status is highlighted when no parameter is displayed. To change the value, act on
) key, while the effective memorisation in EEPROM is highlighted by the
) key, while the effective memorisation in eeprom is highlighted by the
23/03 – VMF-RCC_UN50_01