Fan Coil Menu; Fan Coil Monitor Page - Aermec Vmf-Rcc Zubehörhandbuch

7

FAN COIL MENU

FAN COIL MONITOR PAGE

1 Table of contents
2 Name
3 Program
The increase and decrease keys are used to scroll all of the list of fan coils installed in the system.
— INDEX: fan coil address
— NAME: string associated to the fan coil (zone) to simplify identification
— PROGRAM: indication of the scenario associated to the fan coil
— TEMPERATURE: temperature of the room probe on the fan coil
— SPEED: fan coil instant ventilation speed
— TEMP. ADJUSTMENT: actual regulation temperature of the thermostat
— SET BLOCK: the presence of the
functionality is active, the
key is not active.
— MODE: the functioning mode is shown while the fan coil is running. The selector switch icon can be replaced with
time period. The presence of the
The increase and decrease
By pressing the key, access the pages regarding the fan coil parameters.
The icon indicates that the fan coil is momentarily enabled. Pressing the button disables the functioning of the same and the changing of the image into
The icon indicates that the fan coil is momentarily disabled. Pressing the button enables the functioning of the same and the changing of the image into
Press the key for the system to display the menu page.
Pressing the key changes the zone heating mode:
V = heating of the fan coil unit only
R = radiant floor heating
V+R = fan coil + radiant floor heating
If ROOM T < T SET - 2°C = fan coils+radiant (BOOST)
If ROOM T > T SET - 2°C < TSET = radiant only
44
2
1
4
6
7
4 Temperature
5 Speed
6 Temp. Adjustment
icon indicates that the "Global fan coil set" menu has forced the same characterisation to all fan coils (Set, scenario). When this
icon, indicates that the fan coil does not communicate with panel.
keys are used to scroll all of the list of fan coils installed in the system.
3
5
8
9
7 Set block
8 Mode
9 Heating mode
to indicate that the fan coil is disabled from
23/03 – VMF-RCC_UN50_01
.
.