Werbung
BINDING & DE-BINDING (C-BIND)
9
Accessories for binding and de-binding of covers of the C-BIND system.
• Channel size selector tool (7)
• O•CB Pivot Inserts for Atlas 300 / MB 300, two part kit for all covers (dig. 1)
• O•CB Debinding Tool for Atlas 300 / MB 300 / MBE 300 - de-binding wedge (dig.2) and
AA cover de-binding jig tool (dig.3)
1.
A1
B1
Channel
Number of
dimension
bound sheets
AA 5 mm
A 10 mm
B 13 mm
C 16 mm
D 20 mm
E 24 mm
F 28 mm
G 32 mm
The documents to be bound must have a thickness of 1,8 mm or more (without cover). If
the documents are thinner, you must use filling strips, O•Filling Sticky available from OPUS
see our web site to increase the thickness of the documents. When using covers up to 16
mm or size (C), C-bind before binding put both binding inserts A1 and B1 to the binding
slot and when using covers over 16 mm, put the B1 insert into the binding slot. Depend-
ing on amount of inserts used during binding, position of the extended back support (5)
must be changed. If in the binding slot there is only B1 Insert, the extended back support
should be moved back, In the case of binding with two inserts A1 and B1 the extended
back support (5) should be move forward.
TECHNICAL DATA
10
• Binding capacity..........................................................................up to 300 sheets*
• Net weight....................................................................................19 kg / 41.9 Ibs
• Gross weight.................................................................................19.5 kg / 43 Ibs
• Dimension (H x W x D)...................................270 x 530 x 320 mm / 10.6 x 20.8 x 12.6 In
* the tests were made on 80 g/m
OPUS Sp. z o.o. ● ul. Toruńska 8 ● 44 – 122 Gliwice ● www.opus.pl
MB 300 • User guide
Binding and de-binding covers from the C-BIND system
is performed similarly to binding the METALBIND system,
but: measure the thickness of the documents to be bound
15 - 40
you only measure the documents. You can also use the chart
41 - 90
and select appropriate cover.
91 - 120
121 - 145
Important! The AA cover de-binding jig tool included in
the (O•CB Debinding Tool for Atlas 300 / MB 300 / MBE 300)
146 - 185
should be fitted on the spine edge of AA cover before
186 - 230
debinding.
231 - 265
266 - 300
2
substance paper
2.
7
3.
01.03.2021
EN
Werbung
