Helios easyControls FK82219 Bedienungsanleitung Seite 59

Operating instructions
Comfort controller KWL-BEC
GB
Controller address
If the KWL unit is controller with more than one KWL-BEC, the individual KWL-BEC must be
assigned different addresses. If only one KWL-BEC is active, it must be assigned the address 1 to
ensure trouble-free operation.
Web server
The easyControls control system has a local web server, whereby the KWL unit can be controlled
via an internet browser.
ATTENTION: These settings should only be adjusted by a computer specialist!
Use DHCP
When DHCP is activated ("Yes" marked), all of the following network settings are automatically
assigned and cannot be changed. A condition is that the ventilation unit must be connected to a
router with DHCP configuration.
When DHCP is deactivated, the following data must be manually configured.
IP address
Display depends on DHCP settings (see above)
„Off" Enter the desired IP address
„On" Displays the assigned IP address (Image left)
Gateway
Display depends on DHCP settings (see above)
„Off" Enter the desired gateway
„On" Displays the assigned gateway (Image left)
Subnet mask
Display depends on DHCP settings (see above)
„Off" Enter the desired subnet mask 255.---.---.---
„On" Displays the assigned subnet mask (Image left)
Portal IP address
Display depends on DHCP settings (see above)
„Off" Enter the desired portal IP address
„On" Displays the assigned portal IP address (Image left)
25