Helios easyControls FK82219 Bedienungsanleitung Seite 45

Operating instructions
Comfort controller KWL-BEC
GB
Selection of weekdays
The weekday to be edited is selected with the rotary encoder.
Thus, the supply air temperature can be set in freely definable time sections for each day up to 10
times, (programme: 1/10) (see menu figures below).
Exit
Leave the menu level by pushing „Exit".
Setting range Set value 10 to 45 ° C
From 00:00 - 24:00 hrs. The hours and minutes are set independently in the following step sizes:
Set value: 1 °C; step size Minutes: 1 min.; step size Hours: 1 hr
Programme gaps
If the time of the following programme section is not directly added to the time of the previous
programme section, there is a gap. The programme determines how many gaps there are in the
individually edited programme and briefly shows these on the display. The target temperature is set
at 0 °C or the minimum temperature 16.5 °C (PHI setting) in open gaps.
Copy function
If there is no need to individually edit each day, there is the option to copy a defined programme for
each desired weekday.
Copy weekday(s) and start programme.
11