Reely Mini Bulldog Bedienungsanleitung Seite 50

g) Driving the vehicle
To begin with, use the throttle/brake lever very carefully and drive slowly until you get used to how the
vehicle responds to remote control commands. Do not make quick or sudden movements.
If the vehicle shows a tendency to pull towards the left or the right, adjust the "STEERING TRIM" (6) on the remote
control accordingly.
When switching from forward throttle to reverse, the throttle/brake lever must be left in the neutral position for 1 - 2
seconds (release the lever). If the throttle/brake lever is moved directly from forward throttle to reverse without a
pause, the vehicle will brake (it will not travel backwards).
The following diagrams are for reference purposes only and do not necessarily correspond to the design of
the remote control included with the product!
1. Release the throttle/brake lever to the neutral position to make the vehicle come to a standstill (if necessary, adjust
the "THROTTLE TRIM" lever on the remote control)
2. Slowly pull the throttle/brake lever towards the handle to make the vehicle move forwards
3. Move the throttle/brake lever away from the handle without a pause to make the vehicle move forwards and brake
(the vehicle decelerates quickly rather than coming slowly to a standstill).
4. Move forwards, brake, and then reverse: Move the throttle/brake lever away from the handle without a pause
(brake). When the vehicle is stationary, move the throttle/brake lever to the neutral position for about one second,
and then move the throttle/brake lever away from the handle (the vehicle will start to reverse).
Move forwards
50
Brake If the vehicle is station-
ary, wait for a moment
(1 second)
Reverse