Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Mounting and Installation
9.3 Fitting the oven
CAUTION!
Risk of injury!
Some components may be sharp-edged!
Protect yourself from injury during assembly,
e.g. by wearing work gloves!
• Prepare the installation niche for the oven
according to the dimensional specifications
(see relevant section)
and clean the appliance and the area around the
installation position.
• For installation, do not hold the appliance by the handle
of the appliance door, but as shown in the illustration
(1.1).
• Push the appliance into the niche as far as it will go.
Make sure that the cable is not kinked, squeezed
or twisted!
• Open the appliance door and fix the oven to the built-in
furniture by screwing the screws supplied into the
mounting holes on the left and right of the opening frame
of the cooking chamber respectively (1.2)
(If necessary, pre-drill the screw holes on the furniture
frame accordingly).
ATTENTION!
Risk of damage!
To avoid damage, screw in the mounting screws
by hand and do not overtighten them!
1.2
66
1.1
Werbung
