Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Problem
The appliance cannot
be switched on.
Operation does not
start.
The appliance cannot
be operated.
The appliance is
difficult to operate.
The light does not
turn on.
Possible cause
No power
The settings have
not been made
completely /
correctly.
The appliance is
not switched on.
The control panel is
locked (Display
).
The control panel is
wet or stained.
The keys are not
operated correctly.
The lamp bulb in
the oven must be
replaced.
Possible solution
Make sure that the appliance is
properly connected to an intact
power supply and that the fuse has
not tripped.
Check if there is a power failure in
your home or surroundings.
Set the parameters for the cooking
process as described in the corre-
sponding chapter.
Switch on the appliance.
Unlock the control panel
(see the section on key lock under
"Setting and operation").
Make sure the control panel is com-
pletely clean and dry (see "Using the
touch controls").
Follow the instructions for operating
the sensor keys in the section
"Using the touch controls".
Replace the lamp bulb as described
in the corresponding section.
Troubleshooting
61
Werbung
