Werbung
Verfügbare Sprachen
Verfügbare Sprachen
To keep your appliance looking good and fully functional,
take good care of it; always keep all parts of the appliance clean
and, if possible, always remove any stains immediately,
as described in the relevant following sections:
6.1 Cleaning the oven front
• To clean the front surfaces, use a soft cloth
and a suitable commercial cleaning agent
according to the manufacturer's instructions.
• To clean and maintain the stainless steel surfaces,
you can use commercially available stainless steel products
according to the manufacturer's instructions.
• After cleaning, rinse well with water and dry all surfaces thoroughly
with a soft cloth.
Notes on cleaning the control panel
The display and control element are firmly integrated
or printed on. Do not attempt to remove them for cleaning!
Even a small film of moisture on the control panel,
which may be barely visible, can lead to functional impairments.
Dry the area well after cleaning.
6.2 Cleaning and maintaining the oven door
• Check the door and rubber seal after operation for moisture,
e.g. from condensation, and dry them with a soft cloth if necessary.
• Check the condition of the seal regularly.
If it is damaged, have it replaced by a qualified person
before continuing to use the oven.
• For easier cleaning, you can remove the oven door from the oven
as described in the relevant section.
• Use kitchen paper or a soft cloth / sponge
and suitable commercial detergent to remove stains with.
Cleaning and Maintenance of the Appliance
53
Werbung
