Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7.2 Removing and inserting the telescopic pull-outs
To remove the telescopic pull-outs from the side racks,
proceed for each one as follows:
Removing the telescopic pull-outs
For disassembly on the left side
(right side mirror-inverted):
• Press on the hooks of the telescopic pull-out
at the points marked A until they are released
from the slide-in rack and then turn its lower edge
slightly counterclockwise / upwards (2.1).
• Lift the telescopic pull-out slightly
so that you can remove it from the rack
without the hooks getting caught.
• Now you can remove the telescopic pull-out
from the oven (2.2).
Fixing the telescopic pull-outs
For mounting on the left side
(right side mirror-inverted):
• Place the rail hooks of the telescopic pull-out
at the points marked B on the upper guide rail
of the desired insertion level in the slide-in rack
and then turn its upper edge clockwise /
downwards (2.3).
• Press the rail hooks of the telescopic pull-out
at the points marked C on the lower guide rail
until they „snap in" (2.4).
• Before closing the appliance door,
make sure that all telescopic pull-outs
are fully inserted.
Removing and attaching appliance parts and accessories
2.1
A
2. 2
2.3
B
2. 4
C
57
Werbung
