Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Requirements for the installation site
• For installation, all dimensional specifications and spacing
requirements of this manual, as well as other applicable
regulations, must be observed and complied with!
• Make sure that the kitchen furniture intended
for installation of the appliance guarantees sufficient
ventilation and heat radiation!
The built-in niche must not have a rear wall,
there must be no door or similar at the front
and the distance between the rear wall of the appliance
and the wall must be at least 45mm!
• If possible, install the appliance in a kitchen unit
of standard width 600mm so that it will be flush
with the furniture front.
• The materials of adjacent and surrounding surfaces,
as well as included adhesives, must be fireproof /
heat resistant up to 120°C to exclude deformation
of surfaces or detachment of coatings!
• The appliance must not be installed directly next to
refrigerators or freezers, as the escaping heat can lead
to unnecessarily high energy consumption and impair
their function!
• At least 2 persons are required for installation!
• Make sure that the installation surface for the stove can
support its weight, is level and horizontal and ensures
a high degree of stability!
• If you install a hob above the oven, make sure that the
oven and hob power cables are routed separately
so that the oven can be removed independently of the hob
if necessary!
Mounting and Installation
63
Werbung
