Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
Arrangement and Function of the Operating Elements
5
Operation
ATTENTION
ATTENTION
The banquet trolley, especially the safety equipment, must be checked for external visible damages and de-
fects whenever it is put into operation. In case of damages, inform immediately the competent bodies and do
not put the banquet trolley into operation.
5.1
Arrangement and Function of the Operating Elements
The operating elements of the heated banquet trolley are arranged under the door on the panel of the ther-
mal module.
Figure 5
1
Button of the safety temperature limiter (STB)
2
On/Off switch rotary knob with thermostat
3
Control lamp
91101983_A3
Appliance damages
Fully loaded banquet trolleys on very uneven floors and steep slopes can lose
their balance and tip over.
Only move the banquet trolley over even floors.
If the banquet trolley tips over due to outside influences or inattention, never
catch it manually.
Appliance damages
The mains plug of the appliance must not be plugged in or pulled out under
load. The appliance must be switched off (marking of the On/Off switch rotary
knob with thermostat points upwards). The mains plug must only be pulled out
under load in case of an emergency.
Make absolutely certain that the appliance is switched off before plugging in
or pulling out the mains plug.
Thermal module with operating elements
BKW1/14 L-GN | BKW1/20 L-GN | BKW1/36 B-GN | BKW1/14 L-GN+5PK | BKW1/28 B-GN+10PK | BKW1/23 L-GN
Chapter 5
Page 19
Banquet trolley heated | neutral
Werbung
