Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EGEA TECH
200 LT - 260 LT -200 LT-S - 260 LT-S
Remote connection mode
For connection to the digital inputs, the equipment is equipped
with an additional 6-conductor cable (DIG1=EVU/SG0= white/
brown cable, DIG2=PV/SG1= green/yellow cable, DIG3= grey/
pink cable) already connected to the main -board (located inside
the device).
Remote connections to possible energy systems are the re-
sponsibility of the qualified installer (connection boxes, terminals
and connection cables).
The figures below give an example of a remote connection (fig.
70 and fig. 71), which must not be longer than 3 m.
fig. 71
fig. 70- Remote connection example
EN
188
cod. 3540000410 - Rev. 03 - 09/2023
Werbung
