Disconnect Electrical Connections; Type Rpc Positioner Disassembly; Disposal - GF RPC Betriebsanleitung

Type RPC positioner
7.2

Disconnect electrical connections

► Remove the circular connector.
DANGER!
Risk of injury due to power supply.
► Before intervening in the device or the system, switch off the power supply and secure it against being switched on again.
► Observe the applicable accident prevention and safety regulations for electrical devices.
7.3

Type RPC Positioner disassembly

5
1. Loosen fixing screws.
2. Remove type RPC positioner.
8

Disposal

NOTE!
Environmental damage due to equipment parts contaminated by media.
► Dispose of the device and packaging in an environmentally friendly manner.
► Comply with applicable disposal regulations and environmental regulations.
32
1
No. Designation
1 Circular connector
No. Designation
1 Fixing screws
Operating Instructions