Disconnect Electrical Connections; Type Spc Positioner Disassembly; Disposal - GF SPC D/PID Bedienungsanleitung

Operating Instructions
8.2

Disconnect electrical connections

► Remove the circular connector.
DANGER!
Risk of injury due to power supply.
► Before intervening in the device or the system, switch off the power supply and secure it against being switched on again.
► Observe the applicable accident prevention and safety regulations for electrical devices.
8.3

Type SPC Positioner disassembly

1
1. Loosen fixing screws.
2. Remove type SPC positioner.
9

Disposal

NOTE!
Environmental damage due to equipment parts contaminated by media.
► Dispose of the device and packaging in an environmentally friendly manner.
► Comply with applicable disposal regulations and environmental regulations.
1
2
1
No. Designation
1 Electrical connection housing
2 Circular connector
No. Designation
1 Fixing screws
Type SPC D/PID positioner
43