Inhaltsverzeichnis
Werbung
SWINGARM
EC575000
ASSEMBLY AND INSTALLATION
EC575201
Bearing and oil seal
1. Install:
Bearing 1
G
Oil seal 2
G
To swingarm.
NOTE:
Apply the molybdenum disulfide grease on
G
the bearing when installing.
Install the bearing by pressing it on the side
G
having the manufacture's marks or numbers.
First install the outer and then the inner bear-
G
ings to a specified depth from inside.
Installed depth of bearings:
Outer a: Zero mm (Zero in)
Inner b: 8.5 mm (0.33 in)
2. Install:
Bearing 1
G
Oil seal 2
G
To relay arm.
NOTE:
Apply the molybdenum disulfide grease on
G
the bearing when installing.
Install the bearing by pressing it on the side
G
having the manufacture's marks or numbers.
Installed depth of bearings a:
5 mm (0.20 in)
3. Install:
Bearing 1
G
Oil seal 2
G
To connecting rod.
NOTE:
Apply the molybdenum disulfide grease on
G
the bearing when installing.
Install the bearing by pressing it on the side
G
having the manufacture's marks or numbers.
Installed depth of bearings a:
5 mm (0.20 in)
5 - 56
CHAS
Werbung
Inhaltsverzeichnis
