Labels - Alber via GO V24 Gebrauchsanweisung

13. Labels

There are labels on the via GO and the charger which contain various details on the product. In case of a fault in the device, components
can be replaced by your specialist dealer within the Alber exchange pool or be sent for repair. For this purpose, your specialist dealer will
require certain details that are printed on the labels. The following illustrations are for example purposes only.
Systemnr. / System No.
Produkt [Product]
Betriebsspannung [Nominal Voltage]
Max. Geschwindigkeit [Max. Speed]
Motor Nennleistung [Rated Power]
Nenn-Steigung [Rated Slope]
Batterie Typ [Battery Typ]
Batteriekonfiguration [Battery Config.]
Batterie Nennenergie [Rated Energy]
24
V24229999
R
via GO V24
36 V
5,5 km/h [3.4 mph]
250 W
9.1° [16%]
Lithium-Ion
10INR19/66-2
162 Wh
MD
150 kg
330.7 lb
Alber GmbH
Vor dem Weissen Stein 14
(01)04046727231545
D-72461 Albstadt
(11)221205
Made in Germany
(21)V24229999
System label
The system label is located on the underside of the via GO and
provides information on its important technical data. This makes it
2022-12-05
possible to trace the system, for example.
"Maintenance" label
This label indicates the time of the next maintenance due. It is on
the underside of the via GO
"Technical data" label on the charger
The label shown opposite is located on the underside of the charger
and provides information on its technical data, for example.