Alber via GO V24 Gebrauchsanweisung Seite 31

Contents
1. Introduction
1.1 Intended purpose
1.2 Important safety instructions -
please observe at all times
1.3 Proper use of the via GO and handling instructions
1.4 Signs and symbols
1.5 Permissible operating conditions / operating locations
1.6 Standard scope of delivery
1.7. Optional accessories
1.8. The main elements at a glance
2. Commissioning and travel mode
2.1 Attaching the via GO to the wheelchair
2.2 Removing the via GO from the wheelchair
2.3 Parked position of the via GO on the wheelchair
2.4 Attaching the control unit
2.5 Removing the control unit
2.6 Storing the control unit
2.7 Switching on the via GO
2.8 Switching off the via GO
2.9 Setting the speed
2.10 Starting your trip
2.11 Automatic shutdown
2.12 Immobiliser
2.13 Navigating obstacles
3. Error messages
4. Battery
4.1 Charging the battery
4.2 Temperature indicator
4.3 Safety instructions and warnings
for the via GO and the built-in battery
4.4 Safety instructions and warnings
regarding storage of the via GO
4.5 Safety instructions and warnings
regarding transport and shipment of the via GO
4.6 Safety instructions and warnings for the charger
28.0001.4.02.01
Version: 2023-04-14
5. Transport and storage
2
5.1 Using the wheelchair as a vehicle seat
2
5.2 Safety instructions for transportation
2 of the via GO and a wheelchair in a vehicle
2
5.3 Safety note regarding the electrical connections
3
5.4 Storage
4
5.5 Folding the wheelchair
5
5
6. Safety instructions and hazard information
5
6.1 Safety instructions
6.2 Obstacles
6
6.3 Hazardous areas and hazardous situations
7
7
7. Care, maintenance, and disposal
7
7.1 Charging the battery
8
7.2 Cleaning and disinfection
8
7.3 Disposal
8
7.4 Reuse
9
7.5 Maintenance
10
10
8. Warranty, guarantee, and liability
11
8.1 Warranty for defects
11
8.2 Guarantee of durability
11
8.3 Liability
12
9. Important legal notice for the user of this product
12
10. Important information about air travel
13
10.1 Taking the battery with you during air travel
13
10.2 Storing the control unit during air travel
14
11. Product safety information
14
12. Technical data
15
13. Labels
15
15
This operating manual provides you with information about the product via GO V24,
hereinafter referred to as via GO.
The latest applicable version of this operating manual is available for download on our
website www.alber.de. If you require a large-print version, please contact the Alber
Service Centre.
16
16
16
17
17
17
17
17
19
19
20
20
20
1
20
21
21
21
21
21
21
22
22
22
22
22
23
24