Permissible Operating Conditions / Operating Locations - Alber via GO V24 Gebrauchsanweisung

Indicates the temperature range in which the via GO can be used.
Operation of the via GO: observe the operating manual.
This operating manual contains instructions, information and warnings relating to operation of the via GO and to
charging the batteries. They are to be read and be given due consideration prior to commissioning the via GO or
charging it for the first time.
Maximum weight of person that the via GO can accept as its load capacity:
4
Specification of the manufacturing date on the system label
Name and address of the device manufacturer (see the back of this operating manual)
Protective insulation/appliance class 2
Not suitable for outdoor use (charger)
Hazardous goods labelling (class 9) on the packaging

1.5 Permissible operating conditions / operating locations

The via GO may only be used at temperatures between -25 °C and +50 °C.
Also observe the information regarding the permissible operating conditions in the operating manual of your wheelchair to which the via
GO is attached. Any limits regarding the operation of the wheelchair (e.g. maximum gradeability, maximum permissible height of obstacles,
maximum user weight etc.) must also be observed when using the via GO.
Avoid using the wheelchair on soft ground (e.g. loose chipping, sand, mud, snow, ice or deep puddles).
Observe the safety instructions and hazard information in the individual chapters of this operating manual.
When not in use, do not expose the via GO to strong sunlight for long periods of time. This could cause the motor to
heat up and, in an extreme case, not be able to operate at full power. Plastic parts also age quicker under intense sun-
light.
We strongly recommend equipping the wheelchair with anti-tippers. The use of anti-tippers (fitted in pairs) is manda-
tory when navigating inclines greater than 4.5 degrees (8%).
150 kg