System Settings - Cameo OTOS SP6 Bedienungsanleitung

SYSTEM SETTINGS

Starting from the main display, press MENU to enter the main menu. Select Settings using 
and  and confirm with ENTER.
Information on the submenu items in the Settings menu and the corresponding setting options
can be found in the table below (select with  and  confirm with ENTER, change value or
status with  and  confirm with ENTER).
Settings
Reverse
Display Off Timer
Display
Auto Lock
Dimmer Curve
Curve
Dimmer
Response
PWM Frequency
24
On Rotate display by 180°
Off No display rotation
Car Automatic detection (upright / head-over-mount)
Always On Display lighting permanently on
Deactivation of the display illumination after ap-
Off after 20s
prox. 20 seconds without input
Locking of the controls after approx. 2 minutes
On after 60s without input. To unlock: press and hold MENU for
approx. 3 seconds
Off Lock deactivated
Linear Light intensity increases linearly with DMX value
Light intensity can be finely adjusted at lower DMX
Exponential
values and broadly adjusted at higher DMX values
Light intensity can be broadly adjusted at lower
Logarithmic DMX values and finely adjusted at higher DMX
values
Light intensity can be finely adjusted at lower and
S-curve higher DMX values and broadly adjusted at medium
DMX values
LED Light responds abruptly to changes in DMX value
Light behaves like a halogen spotlight with slight
Halogen
brightness changes
650 Hz,
1530 Hz,
3600 Hz, 12 Select LED PWM frequency
kHz, 18.9
kHz, 25 kHz