Cameo OTOS SP6 Bedienungsanleitung Seite 22

Step 2
User Scene 1 - User Scene 8 + Skip Step
Step 3 t-Step 0s - 20min
t-Fade 0s - 20min
Step 4
Step 5
Step 6
Step 7
Step 8
STAND-ALONE OPERATION PLAY SCENE / PLAY LOOP
Starting from the main display, press MENU to enter the main menu. Select the Control menu
using  and  and confirm with ENTER. Now select the menu item Stand Alone, confirm,
select Play Scene/Loop, confirm, then select the desired scene or loop and confirm again. The
selected scene or loop is activated when confirmed.
MASTER / ALONE PLAY SCENE & PLAY LOOP
In Play Scene and Play Loop stand-alone mode, the control signal of the scenes and loops can be
output to slave units via XLR (DMX OUT) and W-DMX (Control -> Stand Alone -> Master/Alone ->
Master). If the output of the control signal is not desired, the output can be deactivated (Control ->
Stand Alone -> Master/Alone -> Alone).
Starting from the main display, press MENU to enter the main menu. Select the Control menu
using  and  and confirm with ENTER. Now select the Stand Alone menu item, confirm,
select Master/Alone and confirm again.
22
"
"
"
"
"
"
"
User scene selection + skip step
Sets step time
Sets fade time
"
"
"
"
"